2012 Great Wall Hover H3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Great Wall Hover H3.

2012 Great Wall Hover H3 tire sizes

235/65R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2010 – 2014 1 trim

N/A · N/A 235/65 R17 1 fitment

GenerationHover H3 2010–2014

PowerN/A

EngineN/A

Center bore100 mm

PCD6x139.7

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/65 R17	17x7 ET38 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.