Skip to content

2005 Great Wall Hover tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Great Wall Hover.

2005 Great Wall Hover tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Great Wall Hover Hover

2005 – 2010 2 trims

Hover 2.4i

N/A · N/A 235/65 R17 / 235/65 R17 3 fitments
GenerationHover 2005–2010
PowerN/A
EngineN/A
Center bore100 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front235/65 R1717x7 ET38 6x139.7TiresRims
Rear235/65 R1717x7.5 ET46 6x139.7TiresRims
235/65 R1717x7 ET38 6x139.7TiresRims
255/55 R1818x8.5 ET35 6x139.7TiresRims

Hover 2.8 TD

N/A · N/A 235/65 R17 2 fitments
GenerationHover 2005–2010
PowerN/A
EngineN/A
Center bore100 mm
PCD6x139.7
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 R1717x7 ET38 6x139.7TiresRims
255/55 R1818x8.5 ET35 6x139.7TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.