Skip to content

2025 Haval H6 GT tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Haval H6 GT.

2025 Haval H6 GT tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear.

Haval H6 GT H6 GT

2022 – 2027 2 trims

H6 GT 1.5T PHEV

388 hp · 1.5 L GW4B15D I4 Hybrid 1.5 L GW4B15D I4 235/55 R19 3 fitments
GenerationH6 GT 2022–2027
MarketLatin America
Power388 hp
Engine1.5 L GW4B15D I4 Hybrid 1.5 L GW4B15D I4, Hybrid
Center bore66.6 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1919x7.5 ET45 5x114.3TiresRims
OE235/55 R1919x7.5 ET45 5x114.3TiresRims
Alt235/50 R2020x7.5 ET40 5x114.3TiresRims

H6 GT 2.0T

201 hp · 2.0 L GW4N20 I4 Petrol 2.0 L GW4N20 I4 235/55 R19 3 fitments
GenerationH6 GT 2022–2027
MarketLatin America
Power201 hp
Engine2.0 L GW4N20 I4 Petrol 2.0 L GW4N20 I4, Petrol
Center bore66.6 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1919x7.5 ET45 5x114.3TiresRims
OE235/55 R1919x7.5 ET45 5x114.3TiresRims
Alt235/50 R2020x7.5 ET40 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.