Skip to content

2021 Haval H6S tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Haval H6S.

2021 Haval H6S tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Haval H6S H6S

2021 – 2025 2 trims

H6S 1.5T HEV

240 hp · 1.5 L GW4B15D I4 Hybrid 1.5 L GW4B15D I4 235/55 R19 3 fitments
GenerationH6S 2021–2025
MarketChina
Power240 hp
Engine1.5 L GW4B15D I4 Hybrid 1.5 L GW4B15D I4, Hybrid
Center bore66.6 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1919x7.5 ET45 5x114.3–TiresRims
OE235/55 R1919x7.5 ET45 5x114.3–TiresRims
Alt235/50 R2020x7.5 ET40 5x114.3–TiresRims

H6S 2.0T

208 hp · 2.0 L GW4N20 I4 Petrol 2.0 L GW4N20 I4 235/55 R19 3 fitments
GenerationH6S 2021–2025
MarketChina
Power208 hp
Engine2.0 L GW4N20 I4 Petrol 2.0 L GW4N20 I4, Petrol
Center bore66.6 mm
PCD5x114.3
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/55 R1919x7.5 ET45 5x114.3–TiresRims
OE235/55 R1919x7.5 ET45 5x114.3–TiresRims
Alt235/50 R2020x7.5 ET40 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.