2016 Haval H9 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Haval H9.

2016 Haval H9 tire sizes

265/65R17 265/60R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2015 – 2023 3 trims

215 hp · 2.0L GW4C20 I4 265/60 R18 2 fitments

GenerationH9 2015–2023

MarketEurope

Power215 hp

Engine2.0L GW4C20 I4, Petrol

Center bore75.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/60 R18	18x8 ET42 ~~6x139.7~~	32	Tires Rims
265/65 R17	17x8 ET42 ~~6x139.7~~	32	Tires Rims

241 hp · GW4C20 I4 265/60 R18 2 fitments

GenerationH9 2015–2023

MarketSoutheast Asia

Power241 hp

EngineGW4C20 I4, Petrol

Center bore75.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/60 R18	18x8 ET42 ~~6x139.7~~	32	Tires Rims
265/65 R17	17x8 ET42 ~~6x139.7~~	32	Tires Rims

215 hp · 2.0L GW4C20 I4 265/65 R17 2 fitments

GenerationH9 2015–2023

MarketChina

Power215 hp

Engine2.0L GW4C20 I4, Petrol

Center bore75.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/65 R17	17x8 ET42 ~~6x139.7~~	32	Tires Rims
265/60 R18	18x8 ET42 ~~6x139.7~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.