Skip to content

2011 Hawtai Terracan tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Hawtai Terracan.

2011 Hawtai Terracan tire sizes

Bolt pattern
Fitment tables

1 trim sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Hawtai Terracan Terracan

2004 – 2012 China market 1 trim

Terracan 2.4i

123 hp · 4G64S4N I4 235/75 R15 109T 2 fitments
GenerationTerracan 2004–2012
Power123 hp
Engine4G64S4N I4, Petrol
Center bore106.1 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/75 R15 109T15x6 ET35 6x139.729TiresRims
255/65 R16 109T16x7 ET20 6x139.729TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.