2003 Holden Adventra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Holden Adventra.

2003 Holden Adventra tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2005 Australia market 1 trim

315 hp · LS1 V8 225/55 R17 97H 4 fitments

GenerationVY.II 2003–2005

Power315 hp

EngineLS1 V8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 R17 97H	17x7.5 ET48 ~~5x120~~	35	Tires Rims
225/55 R17 97V	17x7.5 ET48 ~~5x120~~	35	Tires Rims
245/50 ZR17 97W	17x8 ET45 ~~5x120~~	38	Tires Rims
245/45 ZR18 95W	18x8 ET45 ~~5x120~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.