Skip to content

1999 Holden Astra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Holden Astra.

Bolt patterns
Fitment tables

2 trims sold in 1999

Open a trim for its factory package and every alternative size, front and rear.

Holden Astra TS

1998 – 2005 Australia market 2 trims

Astra 1.8i

114 hp · X18XE1 I4 185/65 R15 6 fitments
GenerationTS 1998–2005
Power114 hp
EngineX18XE1 I4, Petrol
Center bore65.1 mm
PCD5x110
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R1515x6 ET49 5x110TiresRims
195/60 R1515x6 ET49 5x110TiresRims
195/55 R1616x6 ET49 5x110TiresRims
205/50 R1616x6 ET49 5x110TiresRims
215/45 R1616x6.5 ET45 5x110TiresRims
215/40 R1717x7 ET45 5x110TiresRims

Astra 1.8i 4lug

114 hp · X18XE1 I4 185/65 R15 6 fitments
GenerationTS 1998–2005
Power114 hp
EngineX18XE1 I4, Petrol
Center bore56.5 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R1515x6 ET49 4x100TiresRims
195/60 R1515x6 ET49 4x100TiresRims
195/55 R1616x6 ET49 4x100TiresRims
205/50 R1616x6 ET49 4x100TiresRims
215/45 R1616x6.5 ET45 4x100TiresRims
215/40 R1717x7 ET45 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.