1998 Holden Barina tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Holden Barina.

1998 Holden Barina tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 2000 Australia market 2 trims

82 hp · C14SE I4 165/70 SR13 3 fitments

GenerationSB 1994–2000

Power82 hp

EngineC14SE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 SR13	13x5 ET49 ~~4x100~~	–	Tires Rims
165/65 SR14	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/60 HR14	14x5.5 ET45 ~~4x100~~	–	Tires Rims

105 hp · X16XE I4 165/65 SR14 3 fitments

GenerationSB 1994–2000

Power105 hp

EngineX16XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/65 SR14	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/60 HR14	14x5.5 ET49 ~~4x100~~	–	Tires Rims
185/55 R15 79H	15x6 ET45 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.