1997 Holden Caprice tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Holden Caprice.

1997 Holden Caprice tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 1998 Australia market 3 trims

197 hp · V6 215/60 R16 3 fitments

GenerationVS 1996–1998

Power197 hp

EngineV6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16	16x6.5 ET39 ~~5x120~~	–	Tires Rims
225/55 R16	16x7 ET39 ~~5x120~~	–	Tires Rims
225/50 R17	17x7 ET39 ~~5x120~~	–	Tires Rims

221 hp · V8 215/60 R16 3 fitments

GenerationVS 1996–1998

Power221 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16	16x6.5 ET39 ~~5x120~~	–	Tires Rims
225/55 R16	16x7 ET39 ~~5x120~~	–	Tires Rims
225/50 R17	17x7 ET39 ~~5x120~~	–	Tires Rims

248 hp · V8 215/60 R16 3 fitments

GenerationVS 1996–1998

Power248 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R16	16x6.5 ET39 ~~5x120~~	–	Tires Rims
225/55 R16	16x7 ET39 ~~5x120~~	–	Tires Rims
225/50 R17	17x7 ET39 ~~5x120~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.