2003 Holden Caprice tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Holden Caprice.

2003 Holden Caprice tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2003 – 2004 Australia market 2 trims

204 hp · V6 225/55 VR16 3 fitments

GenerationWK 2003–2004

Power204 hp

EngineV6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/55 VR16	16x7 ET43 ~~5x120~~	–	Tires Rims
225/50 VR17	17x7 ET43 ~~5x120~~	–	Tires Rims
235/45 ZR17	17x7.5 ET43 ~~5x120~~	–	Tires Rims

329 hp · V8 235/45 VR17 3 fitments

GenerationWK 2003–2004

Power329 hp

EngineV8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 VR17	17x7.5 ET43 ~~5x120~~	–	Tires Rims
245/45 ZR17	17x7.5 ET43 ~~5x120~~	–	Tires Rims
245/40 ZR18	18x8 ET39 ~~5x120~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.