2017 Holden Caprice tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2017 Holden Caprice.

2017 Holden Caprice tire sizes

245/40R19 245/35R20

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2013 – 2017 Australia market 1 trim

408 hp · 6.2L LS3 V8 245/40 R19 94V 2 fitments

GenerationWN 2013–2017

Power408 hp

Engine6.2L LS3 V8, Petrol

Center bore66.9 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/40 R19 94V	19x8.5 ET48 ~~5x120~~	36	Tires Rims
245/35 R20 95W	20x8.5 ET48 ~~5x120~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.