2008 Holden Captiva 7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Holden Captiva 7.

2008 Holden Captiva 7 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2015 Australia market 2 trims

148 hp · I4 215/70 R16 105T 5 fitments

GenerationCG.I 2006–2015

Power148 hp

EngineI4, Diesel

Center bore70.5 mm

PCD5x115

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 105T	16x6.5 ET46 ~~5x115~~	–	Tires Rims
235/60 R17 105H	17x7 ET46 ~~5x115~~	35	Tires Rims
235/55 R18 103H	18x7 ET46 ~~5x115~~	35	Tires Rims
235/50 R19 101V	19x7 ET46 ~~5x115~~	38	Tires Rims
245/45 R19 103V	19x8 ET42 ~~5x115~~	38	Tires Rims

227 hp · V6 235/60 R17 105H 5 fitments

GenerationCG.I 2006–2015

Power227 hp

EngineV6, Petrol

Center bore70.5 mm

PCD5x115

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/60 R17 105H	17x7 ET46 ~~5x115~~	35	Tires Rims
235/55 R18 103V	18x7 ET46 ~~5x115~~	35	Tires Rims
235/50 R19 101V	19x7 ET46 ~~5x115~~	38	Tires Rims
255/45 R19 103V	19x8 ET42 ~~5x115~~	38	Tires Rims
255/40 R20 101V	20x8 ET42 ~~5x115~~	38	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.