2010 Holden Colorado tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Holden Colorado.

2010 Holden Colorado tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2012 Australia market 2 trims

161 hp · 4JJ1 I4 215/70 R15 4 fitments

GenerationRC 2008–2012

Power161 hp

Engine4JJ1 I4, Diesel

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15	15x6.5 ET33 ~~6x139.7~~	–	Tires Rims
225/75 R15	15x6.5 ET33 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET33 ~~6x139.7~~	–	Tires Rims
255/65 R17	17x7.5 ET33 ~~6x139.7~~	–	Tires Rims

211 hp · V6 215/70 R15 4 fitments

GenerationRC 2008–2012

Power211 hp

EngineV6, Petrol

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R15	15x6.5 ET33 ~~6x139.7~~	–	Tires Rims
225/75 R15	15x6.5 ET33 ~~6x139.7~~	–	Tires Rims
245/70 R16	16x7 ET33 ~~6x139.7~~	–	Tires Rims
255/65 R17	17x7.5 ET33 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.