2016 Holden Colorado tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 Holden Colorado.

2016 Holden Colorado tire sizes

245/70R16 255/65R17 265/60R18 265/55R19 265/50R20

Bolt pattern

6x139.7

2 generations were sold in 2016. Check your chassis code before ordering wheels.

Other years

2012 2013 2014 2015 2016 2017 2018 2019 All 2008–2021

Fitment tables

2 trims sold in 2016

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Holden Colorado RG.II

2016 – 2021 Australia market 1 trim

Colorado 2.8TD

197 hp · A 428 LWN I4 245/70 R16 111S 5 fitments

GenerationRG.II 2016–2021

Power197 hp

EngineA 428 LWN I4, Diesel

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 111S	16x6.5 ET33 ~~6x139.7~~	35	Tires Rims
255/65 R17 110S	17x7 ET33 ~~6x139.7~~	35	Tires Rims
265/60 R18 110T	18x7.5 ET33 ~~6x139.7~~	35	Tires Rims
265/55 R19 109H	19x8 ET30 ~~6x139.7~~	35	Tires Rims
265/50 R20 108H	20x8 ET30 ~~6x139.7~~	38	Tires Rims

Holden Colorado RG.I

2012 – 2016 Australia market 1 trim

Colorado 2.8TD

197 hp · A 428 LWN I4 245/70 R16 111S 4 fitments

GenerationRG.I 2012–2016

Power197 hp

EngineA 428 LWN I4, Diesel

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 111S	16x6.5 ET33 ~~6x139.7~~	35	Tires Rims
255/65 R17 110S	17x7 ET33 ~~6x139.7~~	35	Tires Rims
265/60 R18 110T	18x7.5 ET33 ~~6x139.7~~	35	Tires Rims
265/55 R19 109H	19x8 ET30 ~~6x139.7~~	35	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.