Skip to content

2003 Holden Commodore tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Holden Commodore.

Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Holden Commodore III (VY)

2002 – 2004 Australia market 3 trims

Commodore 3.8

204 hp · L36 V6 205/65 R15 95H 7 fitments
GenerationIII (VY) 2002–2004
Power204 hp
EngineL36 V6, Petrol
Center bore69.5 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R15 95H15x6 ET43 5x12032TiresRims
225/60 R15 96V15x6 ET43 5x12029TiresRims
225/60 R15 96V15x6.5 ET48 5x12029TiresRims
225/50 R16 92V16x7 ET48 5x12029TiresRims
225/55 R16 95V16x7 ET48 5x12026TiresRims
235/45 R17 93V17x8 ET48 5x12029TiresRims
235/40 R18 92V18x8 ET48 5x12029TiresRims

Commodore 3.8 SC

229 hp · L67 V6 225/50 R16 92V 7 fitments
GenerationIII (VY) 2002–2004
Power229 hp
EngineL67 V6, Petrol
Center bore69.5 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/50 R16 92V16x7 ET48 5x12029TiresRims
225/55 R16 95V16x7 ET48 5x12026TiresRims
235/45 R17 93V17x7.5 ET48 5x12029TiresRims
235/45 R17 93V17x8 ET48 5x12029TiresRims
235/40 ZR18 92W18x7.5 ET48 5x12029TiresRims
235/40 ZR18 92W18x8 ET48 5x12029TiresRims
245/40 ZR18 93W18x8 ET45 5x12029TiresRims

Commodore 5.7

315 hp · LS1 V8 225/60 R15 96V 7 fitments
GenerationIII (VY) 2002–2004
Power315 hp
EngineLS1 V8, Petrol
Center bore69.5 mm
PCD5x120
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R15 96V15x6 ET43 5x12029TiresRims
225/55 R16 95V16x7 ET48 5x12029TiresRims
225/60 R15 96V15x6.5 ET48 5x12029TiresRims
235/45 R17 93V17x8 ET48 5x12029TiresRims
235/40 ZR18 92W18x8 ET48 5x12029TiresRims
245/40 ZR18 93W18x8 ET45 5x12029TiresRims
245/35 ZR19 92W19x8.5 ET43 5x12032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.