1997 Holden Frontera tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Holden Frontera.

1997 Holden Frontera tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1995 – 1998 Australia market 2 trims

119 hp · I4 235/75 R15 102S 3 fitments

GenerationUT 1995–1998

Power119 hp

EngineI4, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 102S	15x7 ET38 ~~6x139.7~~	25	Tires Rims
245/70 R16 102S	16x7 ET38 ~~6x139.7~~	25	Tires Rims
265/60 R17 102S	17x8 ET25 ~~6x139.7~~	28	Tires Rims

134 hp · I4 235/75 R15 102S 3 fitments

GenerationUT 1995–1998

Power134 hp

EngineI4, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 102S	15x7 ET38 ~~6x139.7~~	25	Tires Rims
245/70 R16 102S	16x7 ET38 ~~6x139.7~~	25	Tires Rims
265/60 R17 102S	17x8 ET25 ~~6x139.7~~	28	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.