1986 Holden Jackaroo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Holden Jackaroo.

1986 Holden Jackaroo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1985 – 1991 Australia market 2 trims

74 hp · I4 225/75 SR15 3 fitments

GenerationL1 1985–1991

Power74 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 SR15	15x6 ET15 ~~6x139.7~~	–	Tires Rims
225/70 SR16	16x6.5 ET15 ~~6x139.7~~	–	Tires Rims
235/60 SR17	17x7 ET10 ~~6x139.7~~	–	Tires Rims

109 hp · I4 225/75 SR15 3 fitments

GenerationL1 1985–1991

Power109 hp

EngineI4, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 SR15	15x6 ET15 ~~6x139.7~~	–	Tires Rims
225/70 SR16	16x6.5 ET15 ~~6x139.7~~	–	Tires Rims
235/60 SR17	17x7 ET10 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.