1995 Holden Jackaroo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Holden Jackaroo.

1995 Holden Jackaroo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1992 – 2004 Australia market 1 trim

201 hp · V6 245/70 SR16 4 fitments

GenerationL2 1992–2004

Power201 hp

EngineV6, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 SR16	16x7 ET38 ~~6x139.7~~	–	Tires Rims
255/65 SR17	17x7.5 ET38 ~~6x139.7~~	–	Tires Rims
255/60 SR18	18x7.5 ET35 ~~6x139.7~~	–	Tires Rims
265/55 HR18	18x8 ET35 ~~6x139.7~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.