2002 Holden Monaro tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Holden Monaro.

2002 Holden Monaro tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2003 Australia market 2 trims

229 hp · L67 V6 235/45 ZR17 93W 2 fitments

GenerationV2 2001–2003

Power229 hp

EngineL67 V6, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/45 ZR17 93W	17x8 ET48 ~~5x120~~	30	Tires Rims
235/40 ZR18 91W	18x8 ET48 ~~5x120~~	33	Tires Rims

329 hp · LS1 V8 235/40 ZR18 91W 2 fitments

GenerationV2 2001–2003

Power329 hp

EngineLS1 V8, Petrol

Center bore69.5 mm

PCD5x120

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/40 ZR18 91W	18x8 ET48 ~~5x120~~	33	Tires Rims
245/35 ZR19 91Y	19x8.5 ET43 ~~5x120~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.