1992 Holden Nova tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Holden Nova.

1992 Holden Nova tire sizes

165/75RS13 165/75R13 175/65R14

Bolt pattern

4x100

Other years

1991 1992 1993 1994 All 1991–1994

Fitment tables

4 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Holden Nova LF

1991 – 1994 4 trims

Nova 1.4

80 hp · 1.4 L I4 Petrol 1.4 L I4 165/75 SR13 1 fitment

GenerationLF 1991–1994

MarketAustralia

Power80 hp

Engine1.4 L I4 Petrol 1.4 L I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	165/75 SR13	13x5 ET39 ~~4x100~~	–	Tires Rims

Nova 1.6

90 hp · 1.6 L 4A-F I4 Petrol 1.6 L 4A-F I4 165/75 R13 1 fitment

GenerationLF 1991–1994

MarketAustralia

Power90 hp

Engine1.6 L 4A-F I4 Petrol 1.6 L 4A-F I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	165/75 R13	13x5 ET39 ~~4x100~~	–	Tires Rims

Nova 1.6 EFi

102 hp · 1.6 L 4A-FE I4 Petrol 1.6 L 4A-FE I4 165/75 SR13 1 fitment

GenerationLF 1991–1994

MarketAustralia

Power102 hp

Engine1.6 L 4A-FE I4 Petrol 1.6 L 4A-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	165/75 SR13	13x5 ET39 ~~4x100~~	–	Tires Rims

Nova 1.8 EFi

114 hp · 1.8 L 7A-FE I4 Petrol 1.8 L 7A-FE I4 175/65 R14 1 fitment

GenerationLF 1991–1994

MarketAustralia

Power114 hp

Engine1.8 L 7A-FE I4 Petrol 1.8 L 7A-FE I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	175/65 R14	14x5.5 ET39 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.