2007 Holden Tigra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Holden Tigra.

2007 Holden Tigra tire sizes

185/55R15 185/60R15 185/55R16 205/50R16 205/45R17

Bolt pattern

4x100

2 generations were sold in 2007. Check your chassis code before ordering wheels.

Other years

2005 2006 2007 2008 All 2005–2008

Fitment tables

2 trims sold in 2007

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Holden Tigra XC

2005 – 2008 Australia market 1 trim

Tigra 1.8i

123 hp · Z18XE I4 185/55 R15 84H 5 fitments

GenerationXC 2005–2008

Power123 hp

EngineZ18XE I4, Petrol

Center bore56.5 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/55 R15 84H	15x6 ET36 ~~4x100~~	36	Tires Rims
185/60 R15 86H	15x6 ET36 ~~4x100~~	2.1	Tires Rims
185/55 R16 86H	16x6 ET41 ~~4x100~~	2.1	Tires Rims
205/50 R16 88H	16x6 ET41 ~~4x100~~	2.1	Tires Rims
205/45 R17 87V	17x6.5 ET41 ~~4x100~~	2.1	Tires Rims

Holden Tigra XC

2005 – 2008 1 trim

Tigra 1.8i (T-top)

123 hp · 1.8 L Z18XE I4 Petrol 1.8 L Z18XE I4 185/55 R15 5 fitments

GenerationXC 2005–2008

MarketAustralia

Power123 hp

Engine1.8 L Z18XE I4 Petrol 1.8 L Z18XE I4, Petrol

Center bore56.6 mm

PCD4x100

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	185/55 R15	15x6 ET36 ~~4x100~~	36	Tires Rims
OE	185/60 R15	15x6 ET36 ~~4x100~~	33 F / 30 R	Tires Rims
Alt	185/55 R16	16x6 ET41 ~~4x100~~	33 F / 30 R	Tires Rims
Alt	205/50 R16	16x6 ET41 ~~4x100~~	33 F / 30 R	Tires Rims
Alt	205/45 R17	17x6.5 ET41 ~~4x100~~	33 F / 30 R	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.