2013 Holden Trax tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x105 on every 2013 trim.

Tires for the 2013 Holden Trax

Sizes most trims come with first. Open your trim below for its exact size.

205/70R16 Best-rated standard on 1 trim

Check price on Amazon · 205/70R16
215/65R16 Best-rated optional on 1 trim

Check price on Amazon · 215/65R16
215/60R17 Best-rated optional on 1 trim

Check price on Amazon · 215/60R17

Also listed: 215/55R18 235/50R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2013: 1
Generation: TJ.I
Other years: 2013
2014
2015
2016
2017
2018
2019
2020
All years (2013–2021)

1 trim sold in 2013

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Holden Trax TJ.I

2013–2016 1 trim

Trax 1.8i 138 hp · A18XER I4 205/70R16 97H 5 fitments

Generation: TJ.I · 2013–2016
Power: 138 hp
Engine: A18XER I4, Petrol
Center bore: 56.6 mm
Bolt pattern: 5x105
Thread: M12 x 1.5

Check price on Amazon · 205/70R16 Wheels 16x6.5 ET38 · 5x105 · 56.6 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/70R16 97H	Rim 16x6.5 ET38 ~~5x105~~	29 psi
215/65R16 97H	Rim 16x6.5 ET38 ~~5x105~~	29 psi
215/60R17 96H	Rim 17x7 ET38 ~~5x105~~	29 psi
215/55R18 95H	Rim 18x7 ET38 ~~5x105~~	32 psi
235/50R18 95V	Rim 18x7.5 ET35 ~~5x105~~	35 psi

How to read 97H: 97 is the load index (up to 1,609 lb / 730 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET38 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.