2001 Holden Vectra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Holden Vectra.

2001 Holden Vectra tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 1998 Australia market 2 trims

145 hp · I4 195/65 HR15 3 fitments

GenerationJS 1997–1998

Power145 hp

EngineI4, Petrol

Center bore65.1 mm

PCD5x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 HR15	15x6 ET49 ~~5x110~~	–	Tires Rims
205/60 HR15	15x6 ET49 ~~5x110~~	–	Tires Rims
205/55 VR16	16x6.5 ET44 ~~5x110~~	–	Tires Rims

168 hp · V6 195/65 HR15 3 fitments

GenerationJS 1997–1998

Power168 hp

EngineV6, Petrol

Center bore65.1 mm

PCD5x110

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 HR15	15x6 ET49 ~~5x110~~	–	Tires Rims
205/55 VR16	16x6.5 ET44 ~~5x110~~	–	Tires Rims
215/45 VR17	17x7 ET42 ~~5x110~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.