1987 Honda Accord tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Honda Accord.

1987 Honda Accord tire sizes

195/60R14 185/70RS13 185/70RH13

Bolt pattern

4x100

Other years

1983 1984 1985 1986 1987 1988 1989 1990 All 1976–2026

Fitment tables

4 trims sold in 1987

Open a trim for its factory package and every alternative size, front and rear.

Honda Accord III (CA)

1986 – 1989 Japan market 4 trims

Accord 1.8 (E-CA1)

110 hp · I4 165x SR13 2 fitments

GenerationIII (CA) 1986–1989

Power110 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
185/70 SR13	13x5 ET45 ~~4x100~~	–	Tires Rims

Accord 1.8 (E-CA2)

101 hp · I4 185/70 SR13 2 fitments

GenerationIII (CA) 1986–1989

Power101 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Accord 2.0 (E-CA5)

99 hp · I4 165x SR13 3 fitments

GenerationIII (CA) 1986–1989

Power99 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
185/70 SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Accord 2.0i (E-CA3)

160 hp · I4 185/70 HR13 2 fitments

GenerationIII (CA) 1986–1989

Power160 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/70 HR13	13x5 ET45 ~~4x100~~	–	Tires Rims
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.