Skip to content

1996 Honda Acty tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Honda Acty.

1996 Honda Acty tire sizes

Bolt pattern
Fitment tables

5 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear.

Honda Acty II Facelift

1990 – 1995 Japan market 5 trims

Acty 0.7 (V-HA3)

38 hp · I3 125x R12 3 fitments
GenerationII Facelift 1990–1995
Power38 hp
EngineI3, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
125x R1212x3.5 ET40 4x100–TiresRims
145x R1212x3.5 ET40 4x100–TiresRims
145/80 SR1212x3.5 ET40 4x100–TiresRims

Acty 0.7 (V-HA4)

38 hp · I3 145x SR12 3 fitments
GenerationII Facelift 1990–1995
Power38 hp
EngineI3, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1212x3.5 ET40 4x100–TiresRims
145/80 SR1212x3.5 ET40 4x100–TiresRims
155/70 SR1313x4 ET40 4x100–TiresRims

Acty 0.7 (V-HA5)

38 hp · I3 145x SR12 3 fitments
GenerationII Facelift 1990–1995
Power38 hp
EngineI3, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
145x SR1212x3.5 ET40 4x100–TiresRims
145/80 SR1212x3.5 ET40 4x100–TiresRims
155/70 SR1313x4 ET40 4x100–TiresRims

Acty 0.7 (V-HH3)

38 hp · I3 125x R12 3 fitments
GenerationII Facelift 1990–1995
Power38 hp
EngineI3, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
125x R1212x3.5 ET40 4x100–TiresRims
145x R1212x3.5 ET40 4x100–TiresRims
145/80 SR1212x3.5 ET40 4x100–TiresRims

Acty 0.7 (V-HH4)

38 hp · I3 125x R12 3 fitments
GenerationII Facelift 1990–1995
Power38 hp
EngineI3, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
125x R1212x3.5 ET40 4x100–TiresRims
145x R1212x3.5 ET40 4x100–TiresRims
145/80 SR1212x3.5 ET40 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.