2000 Honda Capa tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Honda Capa.

2000 Honda Capa tire sizes

175/70R13 175/65R14

Bolt pattern

4x100

2 generations were sold in 2000. Check your chassis code before ordering wheels.

Other years

1998 1999 2000 2001 2002 All 1998–2002

Fitment tables

4 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Capa Facelift

2000 – 2002 2 trims

Capa 1.5 (GF-GA4)

97 hp · I4 175/70 R13 82S 2 fitments

GenerationFacelift 2000–2002

Power97 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET35 ~~4x100~~	–	Tires Rims
175/65 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Capa 1.5 (GF-GA6)

97 hp · I4 175/70 R13 82S 2 fitments

GenerationFacelift 2000–2002

Power97 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET35 ~~4x100~~	–	Tires Rims
175/65 R14 82H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Honda Capa Capa

1998 – 2000 2 trims

Capa 1.5 (GF-GA4)

97 hp · I4 175/70 R13 82S 1 fitment

GenerationCapa 1998–2000

Power97 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET35 ~~4x100~~	–	Tires Rims

Capa 1.5 (GF-GA6)

97 hp · I4 175/70 R13 82S 1 fitment

GenerationCapa 1998–2000

Power97 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET35 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.