Skip to content

1992 Honda City tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Honda City.

1992 Honda City tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1992

Open a trim for its factory package and every alternative size, front and rear.

Honda City GA Facelift

1988 – 1994 Japan market 3 trims

City 1.2 (E-GA1)

75 hp · I4 165/70 R12 77S 3 fitments
GenerationGA Facelift 1988–1994
Power75 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/70 R12 77S12x4 ET38 4x100–TiresRims
165/65 R13 76S13x5 ET38 4x100–TiresRims
175/60 R13 76H13x5 ET38 4x100–TiresRims

City 1.3 (E-GA2)

99 hp · I4 175/60 R13 76H / 175/60 R13 76H 2 fitments
GenerationGA Facelift 1988–1994
Power99 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
Front175/60 R13 76H13x4 ET45 4x100–TiresRims
Rear175/60 R13 76H13x4 ET35 4x100–TiresRims
Front165/65 R13 76S13x4 ET40 4x100–TiresRims
Rear165/65 R13 76S13x4 ET35 4x100–TiresRims

City 1.3 (E-GA2)

80 hp · I4 165/65 R13 76S 2 fitments
GenerationGA Facelift 1988–1994
Power80 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
165/65 R13 76S13x4 ET35 4x100–TiresRims
175/60 R13 76H13x4 ET35 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.