Skip to content

2001 Honda Civic Type R tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Honda Civic Type R.

2001 Honda Civic Type R tire sizes

Bolt pattern

2 generations were sold in 2001. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2001

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Civic Type R EP3

2001 – 2005 2 trims

Civic Type R 2.0i

197 hp · 2.0L K20A2 I4 205/45 ZR17 84W 4 fitments
GenerationEP3 2001–2005
MarketEurope
Power197 hp
Engine2.0L K20A2 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/45 ZR17 84W17x7 ET45 5x114.333TiresRims
235/40 ZR17 89W17x7.5 ET42 5x114.336TiresRims
225/35 ZR18 87W18x7.5 ET42 5x114.336TiresRims
235/35 ZR18 88W18x8 ET42 5x114.336TiresRims

Civic Type R 2.0i (LA-EP3)

212 hp · I4 205/45 ZR17 84W 4 fitments
GenerationEP3 2001–2005
MarketJapan
Power212 hp
EngineI4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/45 ZR17 84W17x7 ET45 5x114.333TiresRims
235/40 ZR17 89W17x7.5 ET42 5x114.336TiresRims
225/35 ZR18 87W18x7.5 ET42 5x114.336TiresRims
235/35 ZR18 88W18x8 ET42 5x114.336TiresRims

Honda Civic Type R EK9

1997 – 2001 1 trim

Civic Type R 1.6 (GF-EK9)

182 hp · I4 195/55 R15 84V 1 fitment
GenerationEK9 1997–2001
MarketJapan
Power182 hp
EngineI4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R15 84V15x6 ET45 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.