1985 Honda CR-X tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Honda CR-X.

1985 Honda CR-X tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1983 – 1987 2 trims

70 hp · I4 165/70 R13 78S 3 fitments

GenerationI 1983–1987

Power70 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13 78S	13x5 ET45 ~~4x100~~	2.2	Tires Rims
175/70 R13	13x6 ET40 ~~4x100~~	2.2	Tires Rims
185/60 R14	14x6 ET40 ~~4x100~~	2.2	Tires Rims

99 hp · 1.5L I4 165/70 R13 78S 3 fitments

GenerationI 1983–1987

Power99 hp

Engine1.5L I4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/70 R13 78S	13x5 ET45 ~~4x100~~	2.2	Tires Rims
175/70 R13	13x6 ET40 ~~4x100~~	2.2	Tires Rims
185/60 R14	14x6 ET40 ~~4x100~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.