2012 Honda Crosstour tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Honda Crosstour.

2012 Honda Crosstour tire sizes

225/65R17 225/60R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2011 – 2013 3 trims

192 hp · I4 225/65 R17 102T 2 fitments

GenerationCrosstour 2011–2013

MarketUSA

Power192 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102T	17x6.5 ET55 ~~5x114.3~~	32	Tires Rims
225/60 R18 100H	18x7 ET55 ~~5x114.3~~	32	Tires Rims

271 hp · V6 225/65 R17 102T 2 fitments

GenerationCrosstour 2011–2013

MarketUSA

Power271 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102T	17x6.5 ET55 ~~5x114.3~~	32	Tires Rims
225/60 R18 100H	18x7 ET55 ~~5x114.3~~	33	Tires Rims

271 hp · 3.5L J35Z2 V6 225/65 R17 102T 2 fitments

GenerationCrosstour 2011–2013

MarketEurope

Power271 hp

Engine3.5L J35Z2 V6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/65 R17 102T	17x6.5 ET55 ~~5x114.3~~	32	Tires Rims
225/60 R18 100H	18x7 ET55 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.