1998 Honda Domani tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Honda Domani.

1998 Honda Domani tire sizes

185/65R14 175/70R13 175/65R14

Bolt pattern

4x100

Other years

1994 1995 1996 1997 1998 1999 2000 2001 All 1992–2001

Fitment tables

4 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Honda Domani II

1997 – 2001 4 trims

Domani 1.5 (E-MB3)

103 hp · I4 175/70 R13 82S 1 fitment

GenerationII 1997–2001

Power103 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82S	13x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.6 (E-MB4)

118 hp · I4 185/65 R14 86H 1 fitment

GenerationII 1997–2001

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86H	14x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.6 (E-MB5)

118 hp · I4 175/65 R14 82H 1 fitment

GenerationII 1997–2001

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82H	14x5 ET45 ~~4x100~~	–	Tires Rims

Domani 1.6 LEV (E-MB4)

103 hp · I4 185/65 R14 86H 1 fitment

GenerationII 1997–2001

Power103 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86H	14x5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.