Skip to content

2014 Honda Freed tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Honda Freed.

2014 Honda Freed tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2014

Open a trim for its factory package and every alternative size, front and rear.

Honda Freed I

2008 – 2016 Japan market 4 trims

Freed 1.5H (DAA-GP3)

87 hp · I4 185/65 R15 88S 2 fitments
GenerationI 2008–2016
MarketJapan
Power87 hp
EngineI4, Hybrid
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88S15x5.5 ET50 4x10032TiresRims
185/70 R14 88S14x5.5 ET50 4x10032TiresRims

Freed 1.5i

117 hp · I4 185/65 R15 88S 4 fitments
GenerationI 2008–2016
MarketSoutheast Asia
Power117 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88S15x5.5 ET50 4x10032TiresRims
185/70 R14 88S14x5.5 ET50 4x10032TiresRims
195/60 R1515x6 ET50 4x10032TiresRims
205/50 R1616x6.5 ET50 4x10032TiresRims

Freed 1.5i (DBA-GB3)

117 hp · I4 185/70 R14 88S 2 fitments
GenerationI 2008–2016
MarketJapan
Power117 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/70 R14 88S14x5.5 ET50 4x10032TiresRims
185/65 R15 88S15x5.5 ET50 4x10032TiresRims

Freed 1.5i (DBA-GB4)

117 hp · I4 185/65 R15 88S 2 fitments
GenerationI 2008–2016
MarketJapan
Power117 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88S15x5.5 ET50 4x10032TiresRims
185/70 R14 88S14x5.5 ET50 4x10032TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.