2001 Honda Insight tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Honda Insight.

2001 Honda Insight tire sizes

165/65R14 175/55R15

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2006 3 trims

73 hp · I3 165/65 R14 78S 2 fitments

GenerationZE1 1999–2006

MarketUSA

Power73 hp

EngineI3, Hybrid

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/65 R14 78S	14x5.5 ET45 ~~4x100~~	2.4	Tires Rims
175/55 R15	15x5.5 ET46 ~~4x100~~	2.4	Tires Rims

75 hp · I3 165/65 R14 79T 2 fitments

GenerationZE1 1999–2006

MarketEurope

Power75 hp

EngineI3, Hybrid

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/65 R14 79T	14x5.5 ET45 ~~4x100~~	35	Tires Rims
175/55 R15	15x5.5 ET46 ~~4x100~~	35	Tires Rims

68 hp · I3 165/65 R14 79S 2 fitments

GenerationZE1 1999–2006

MarketJapan

Power68 hp

EngineI3, Hybrid

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165/65 R14 79S	14x5.5 ET45 ~~4x100~~	2.4	Tires Rims
175/55 R15	15x5.5 ET46 ~~4x100~~	2.4	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.