2003 Honda Inspire tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Honda Inspire.

2003 Honda Inspire tire sizes

205/60R16 205/60R15 215/50R17

Bolt pattern

5x114.3

2 generations were sold in 2003. Check your chassis code before ordering wheels.

Other years

1999 2000 2001 2002 2003 2004 2005 2006 All 1992–2026

Fitment tables

3 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Inspire UC

2003 – 2007 1 trim

Inspire 3.0i (UA-UC1)

247 hp · V6 205/60 R16 92V 1 fitment

GenerationUC 2003–2007

Power247 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92V	16x6.5 ET55 ~~5x114.3~~	2.1	Tires Rims

Honda Inspire UA4/UA5 Facelift

2001 – 2003 2 trims

Inspire 2.5i (LA-UA4)

197 hp · V6 205/60 R16 92V 2 fitments

GenerationUA4/UA5 Facelift 2001–2003

Power197 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92V	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims
205/60 R15 91H	15x6.5 ET55 ~~5x114.3~~	32	Tires Rims

Inspire 3.2i (LA-UA5)

256 hp · V6 215/50 R17 91V 2 fitments

GenerationUA4/UA5 Facelift 2001–2003

Power256 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/50 R17 91V	17x6.5 ET55 ~~5x114.3~~	32	Tires Rims
205/60 R16 92V	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.