2003 Honda Integra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Honda Integra.

2003 Honda Integra tire sizes

215/45R17 195/65R15

Bolt pattern

5x114.3

Other years

1999 2000 2001 2002 2003 2004 2005 2006 All 1989–2026

Fitment tables

4 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Honda Integra IV

2001 – 2004 4 trims

Integra 2.0 (LA-DC5)

158 hp · I4 195/65 R15 91H 1 fitment

GenerationIV 2001–2004

MarketJapan

Power158 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/65 R15 91H	15x6 ET45 ~~5x114.3~~	–	Tires Rims

Integra 2.0 Type R

217 hp · I4 215/45 ZR17 91Y 1 fitment

GenerationIV 2001–2004

MarketEurope

Power217 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/45 ZR17 91Y	17x7 ET45 ~~5x114.3~~	2.3	Tires Rims

Integra 2.0 Type R (LA-DC5)

217 hp · I4 215/45 ZR17 91Y 1 fitment

GenerationIV 2001–2004

MarketJapan

Power217 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/45 ZR17 91Y	17x7 ET60 ~~5x114.3~~	–	Tires Rims

Integra 2.0i

158 hp · I4 215/45 ZR17 91Y 1 fitment

GenerationIV 2001–2004

MarketEurope

Power158 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/45 ZR17 91Y	17x7 ET45 ~~5x114.3~~	2.3	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.