2010 Honda Legend tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Honda Legend.

2010 Honda Legend tire sizes

235/50R17 245/45R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2012 3 trims

291 hp · 3.7L J37A3 V6 245/45 ZR18 96Y 2 fitments

GenerationKB Facelift 2008–2012

MarketEurope

Power291 hp

Engine3.7L J37A3 V6, Petrol

Center bore64.1 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 ZR18 96Y	18x8 ET55 ~~5x120~~	2.2	Tires Rims
235/50 R17 96V	17x8 ET55 ~~5x120~~	2.1	Tires Rims

303 hp · V6 245/45 ZR18 96Y 2 fitments

GenerationKB Facelift 2008–2012

MarketAustralia

Power303 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/45 ZR18 96Y	18x8 ET55 ~~5x120~~	2.2	Tires Rims
235/50 R17 96V	17x8 ET55 ~~5x120~~	2.1	Tires Rims

304 hp · V6 235/50 R17 96V 2 fitments

GenerationKB Facelift 2008–2012

MarketJapan

Power304 hp

EngineV6, Petrol

Center bore64.1 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/50 R17 96V	17x8 ET55 ~~5x120~~	2.1	Tires Rims
245/45 ZR18 96Y	18x8 ET55 ~~5x120~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.