Skip to content

1998 Honda Logo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Honda Logo.

1998 Honda Logo tire sizes

Bolt pattern

2 generations were sold in 1998. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Logo Facelift

1998 – 2002 3 trims

Logo 1.3 (GF-GA3)

66 hp · I4 155/80 R13 79S 3 fitments
GenerationFacelift 1998–2002
Power66 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 79S13x4.5 ET35 4x100TiresRims
175/70 R13 82S13x5 ET35 4x100TiresRims
175/65 R14 82H14x5 ET35 4x100TiresRims

Logo 1.3 (GF-GA3)

90 hp · I4 175/65 R14 85H 3 fitments
GenerationFacelift 1998–2002
Power90 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 85H14x5 ET35 4x100TiresRims
155/80 R13 79S13x4.5 ET35 4x100TiresRims
175/70 R13 82S13x5 ET35 4x100TiresRims

Logo 1.3 (GF-GA5)

66 hp · I4 155/80 R13 79S 3 fitments
GenerationFacelift 1998–2002
Power66 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155/80 R13 79S13x4.5 ET35 4x100TiresRims
155x SR1313x4.5 ET35 4x100TiresRims
175/70 R13 82S13x5 ET35 4x100TiresRims

Honda Logo Logo

1996 – 1998 1 trim

Logo 1.3 (E-GA3)

66 hp · I4 155x SR13 2 fitments
GenerationLogo 1996–1998
Power66 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
155x SR1313x4.5 ET35 4x100TiresRims
175/70 R13 82H13x5 ET35 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.