Skip to content

2015 Honda Mobilio tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2015 Honda Mobilio.

2015 Honda Mobilio tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2015

Open a trim for its factory package and every alternative size, front and rear.

Honda Mobilio II

2014 – 2017 2 trims

Mobilio 1.5 i-DTEC

99 hp · I4 185/65 R15 81H 1 fitment
GenerationII 2014–2017
Power99 hp
EngineI4, Diesel
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 81H15x5.5 ET50 4x10029TiresRims

Mobilio 1.5 i-VTEC

118 hp · I4 185/65 R15 81H 1 fitment
GenerationII 2014–2017
Power118 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 81H15x5.5 ET50 4x10029TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.