1998 Honda Orthia tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Honda Orthia.

1998 Honda Orthia tire sizes

185/65R14 195/60R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1997 – 1999 3 trims

138 hp · I4 185/65 R14 86S 1 fitment

GenerationFacelift 1997–1999

Power138 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5 ET45 ~~4x100~~	–	Tires Rims

143 hp · I4 185/65 R14 86S 2 fitments

GenerationFacelift 1997–1999

Power143 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5 ET45 ~~4x100~~	–	Tires Rims
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

143 hp · I4 185/65 R14 86S 2 fitments

GenerationFacelift 1997–1999

Power143 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/65 R14 86S	14x5 ET45 ~~4x100~~	–	Tires Rims
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.