2025 Honda Passport tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 Honda Passport.

2025 Honda Passport tire sizes

245/60R18 265/60R18 275/60R18 265/45R20

Bolt pattern

5x120

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Other years

2019 2020 2021 2022 2023 2024 2025 2026 All 1994–2026

Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Honda Passport IV (YF9)

2025 – 2027 1 trim

Passport 3.5i

285 hp · 3.5 L J35Y8 V6 Petrol 3.5 L J35Y8 V6 275/60 R18 / 275/60 R18 2 fitments

GenerationIV (YF9) 2025–2027

MarketUSA

Power285 hp

Engine3.5 L J35Y8 V6 Petrol 3.5 L J35Y8 V6, Petrol

Center bore64.1 mm

PCD5x120

ThreadM14 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	Front275/60 R18	18x ~~5x120~~	–	Tires Rims
	Rear275/60 R18	~~5x120~~	–	Tires
OE	265/60 R18	18x8 ET55 ~~5x120~~	–	Tires Rims

Honda Passport III Facelift

2022 – 2025 1 trim

Passport 3.5i

280 hp · 3.5 L V6 Petrol 3.5 L V6 245/60 R18 2 fitments

GenerationIII Facelift 2022–2025

MarketUSA

Power280 hp

Engine3.5 L V6 Petrol 3.5 L V6, Petrol

Center bore64.1 mm

PCD5x120

ThreadM14 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	245/60 R18	18x8 ET55 ~~5x120~~	–	Tires Rims
OE	265/45 R20	20x8.5 ET55 ~~5x120~~	38	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.