1983 Honda Prelude tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1983 Honda Prelude.

1983 Honda Prelude tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1982 – 1987 3 trims

103 hp · I4 165x SR13 5 fitments

GenerationAB/BA1/BB 1982–1987

MarketEurope

Power103 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
185/70 R13 86H	13x5.5 ET45 ~~4x100~~	1.8	Tires Rims
175/70 R14 84H	14x5.5 ET45 ~~4x100~~	1.8	Tires Rims
185/65 HR14	14x5.5 ET45 ~~4x100~~	1.8	Tires Rims
195/55 HR15	15x6 ET42 ~~4x100~~	1.8	Tires Rims

103 hp · I4 165x SR13 4 fitments

GenerationAB/BA1/BB 1982–1987

MarketJapan

Power103 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
165x SR13	13x5 ET45 ~~4x100~~	–	Tires Rims
185/70 HR13	13x5 ET45 ~~4x100~~	–	Tires Rims
185/65 HR14	14x5.5 ET45 ~~4x100~~	–	Tires Rims
195/55 HR15	15x6 ET42 ~~4x100~~	–	Tires Rims

158 hp · I4 195/60 R14 85H 3 fitments

GenerationAB/BA1/BB 1982–1987

MarketJapan

Power158 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R14 85H	14x5.5 ET45 ~~4x100~~	–	Tires Rims
205/50 HR15	15x6.5 ET42 ~~4x100~~	–	Tires Rims
205/45 VR16	16x7 ET38 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.