1999 Honda S2000 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1999 Honda S2000.

1999 Honda S2000 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1999 – 2009 3 trims

237 hp · 2.0L I4 205/55 ZR16 89W / 225/50 ZR16 92W 2 fitments

GenerationAP 1999–2009

MarketEurope

Power237 hp

Engine2.0L I4, Petrol

Center borefront axis 70.1 mm rear axis 64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/55 ZR16 89W	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims
Rear225/50 ZR16 92W	16x7.5 ET65 ~~5x114.3~~	32	Tires Rims
Front215/45 ZR17 89W	17x7 ET55 ~~5x114.3~~	32	Tires Rims
Rear245/40 ZR17 92W	17x8.5 ET65 ~~5x114.3~~	32	Tires Rims

236 hp · I4 205/55 ZR16 89W 2 fitments

GenerationAP 1999–2009

MarketAustralia

Power236 hp

EngineI4, Petrol

Center borefront axis 70.1 mm rear axis 64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/55 ZR16 89W	16x7.5 ET65 ~~5x114.3~~	32	Tires Rims
215/45 ZR17 87W	17x8.5 ET65 ~~5x114.3~~	32	Tires Rims

247 hp · I4 205/55 R16 89V / 225/50 R16 92V 2 fitments

GenerationAP 1999–2009

MarketJapan

Power247 hp

EngineI4, Petrol

Center borefront axis 70.1 mm rear axis 64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front205/55 R16 89V	16x6.5 ET55 ~~5x114.3~~	32	Tires Rims
Rear225/50 R16 92V	16x7.5 ET65 ~~5x114.3~~	32	Tires Rims
Front215/45 ZR17 87W	17x7 ET55 ~~5x114.3~~	32	Tires Rims
Rear245/40 ZR17 91W	17x8.5 ET65 ~~5x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.