Skip to content

2024 Honda Stepwgn Spada tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 Honda Stepwgn Spada.

2024 Honda Stepwgn Spada tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

Honda Stepwgn Spada VI

2022 – 2027 3 trims

Stepwgn Spada 1.5i 5BA-RP6 (MPV, 5d)

148 hp · 1.5 L L15C I4 Petrol 1.5 L L15C I4 205/60 R16 2 fitments
GenerationVI 2022–2027
MarketJapan
Power148 hp
Engine1.5 L L15C I4 Petrol 1.5 L L15C I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/60 R1616x6.5 ET45 5x114.335 F / 39 RTiresRims
OE205/55 R1717x6.5 ET45 5x114.336 F / 41 RTiresRims

Stepwgn Spada 1.5i 5BA-RP7 (MPV, 5d)

148 hp · 1.5 L L15C I4 Petrol 1.5 L L15C I4 205/60 R16 1 fitment
GenerationVI 2022–2027
MarketJapan
Power148 hp
Engine1.5 L L15C I4 Petrol 1.5 L L15C I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/60 R1616x6.5 ET45 5x114.335 F / 39 RTiresRims

Stepwgn Spada 2.0 e:HEV 6AA-RP8 (MPV, 5d)

181 hp · 1.5 L LFA-H4 I4 Petrol 1.5 L LFA-H4 I4 205/60 R16 2 fitments
GenerationVI 2022–2027
MarketJapan
Power181 hp
Engine1.5 L LFA-H4 I4 Petrol 1.5 L LFA-H4 I4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/60 R1616x6.5 ET45 5x114.335 F / 39 RTiresRims
OE205/55 R1717x6.5 ET45 5x114.336 F / 41 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.