Skip to content

1997 Honda Stepwgn tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Honda Stepwgn.

1997 Honda Stepwgn tire sizes

Bolt pattern
Fitment tables

2 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Honda Stepwgn RF1/RF2

1996 – 1999 2 trims

Stepwgn 2.0i (E-RF1)

123 hp · I4 195/65 R15 91S 1 fitment
GenerationRF1/RF2 1996–1999
Power123 hp
EngineI4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET50 5x114.3–TiresRims

Stepwgn 2.0i (E-RF2)

123 hp · I4 195/65 R15 91S 1 fitment
GenerationRF1/RF2 1996–1999
Power123 hp
EngineI4, Petrol
Center bore64.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R15 91S15x5.5 ET50 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.