2006 Honda Stepwgn tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Honda Stepwgn.

2006 Honda Stepwgn tire sizes

205/65R15 205/60R16

Bolt pattern

5x114.3

Other years

2002 2003 2004 2005 2006 2007 2008 2009 All 1996–2026

Fitment tables

4 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Honda Stepwgn RG

2005 – 2007 4 trims

Stepwgn 2.0i (DBA-RG1)

153 hp · I4 205/65 R15 94S 1 fitment

GenerationRG 2005–2007

Power153 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94S	15x6 ET50 ~~5x114.3~~	2.4	Tires Rims

Stepwgn 2.0i (DBA-RG2)

153 hp · I4 205/65 R15 94S 1 fitment

GenerationRG 2005–2007

Power153 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/65 R15 94S	15x6 ET50 ~~5x114.3~~	2.4	Tires Rims

Stepwgn 2.4i (DBA-RG3)

160 hp · I4 205/60 R16 92H 1 fitment

GenerationRG 2005–2007

Power160 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92H	16x6 ET50 ~~5x114.3~~	2.4	Tires Rims

Stepwgn 2.4i (DBA-RG4)

160 hp · I4 205/60 R16 92H 1 fitment

GenerationRG 2005–2007

Power160 hp

EngineI4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 92H	16x6 ET50 ~~5x114.3~~	2.4	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.