2022 Honda Stepwgn tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Honda Stepwgn.

2022 Honda Stepwgn tire sizes

205/60R16 205/55R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2022 – 2027 3 trims

148 hp · 1.5L L15C I4 205/60 R16 96H 2 fitments

GenerationRP6/RP7/RP8 2022–2027

Power148 hp

Engine1.5L L15C I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 96H	16x6.5 ET45 ~~5x114.3~~	2.7	Tires Rims
205/55 R17 95V	17x6.5 ET45 ~~5x114.3~~	2.8	Tires Rims

148 hp · 1.5L L15C I4 205/60 R16 96H 1 fitment

GenerationRP6/RP7/RP8 2022–2027

Power148 hp

Engine1.5L L15C I4, Petrol

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 96H	16x6.5 ET45 ~~5x114.3~~	2.7	Tires Rims

143 hp · 1.5L LFA-H4 I4 205/60 R16 96H 2 fitments

GenerationRP6/RP7/RP8 2022–2027

Power143 hp

Engine1.5L LFA-H4 I4, Hybrid

Center bore64.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R16 96H	16x6.5 ET45 ~~5x114.3~~	2.7	Tires Rims
205/55 R17 95V	17x6.5 ET45 ~~5x114.3~~	2.8	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.