Skip to content

1994 Honda Vigor tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1994 Honda Vigor.

1994 Honda Vigor tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1994

Open a trim for its factory package and every alternative size, front and rear.

Honda Vigor III

1989 – 1995 3 trims

Vigor 2.0 (E-CB5)

158 hp · I5 175/70 R14 84S 3 fitments
GenerationIII 1989–1995
Power158 hp
EngineI5, Petrol
Center bore64.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84S14x5.5 ET55 4x114.3–TiresRims
195/65 R14 89H14x5.5 ET55 4x114.3–TiresRims
205/55 R15 87V15x6 ET45 4x114.3–TiresRims

Vigor 2.0 (E-CC3)

162 hp · I5 195/60 R15 88H 2 fitments
GenerationIII 1989–1995
Power162 hp
EngineI5, Petrol
Center bore64.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R15 88H15x6 ET55 4x114.3–TiresRims
195/60 R15 86H15x6 ET55 4x114.3–TiresRims

Vigor 2.5 (E-CC2)

188 hp · I5 205/60 R15 91H 2 fitments
GenerationIII 1989–1995
Power188 hp
EngineI5, Petrol
Center bore64.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R15 91H15x6 ET55 4x114.3–TiresRims
205/60 R15 89H15x6 ET55 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.