Skip to content

2022 Hongqi H9 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2022 Hongqi H9.

2022 Hongqi H9 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2022

Open a trim for its factory package and every alternative size, front and rear.

Hongqi H9 H9

2020 – 2024 2 trims

H9 2.0T

241 hp · 2.0 L CA4GC20TD I4 Petrol 2.0 L CA4GC20TD I4 235/50 R18 3 fitments
GenerationH9 2020–2024
Power241 hp
Engine2.0 L CA4GC20TD I4 Petrol 2.0 L CA4GC20TD I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE235/50 R1818x7.5 5x114.332TiresRims
OE245/45 ZR1919x8 5x114.332TiresRims
OE245/40 ZR2020x8 5x114.335 F / 32 RTiresRims

H9 3.0T

268 hp · 3.0 L CA6GV30TD V6 Petrol 3.0 L CA6GV30TD V6 245/45 ZR19 3 fitments
GenerationH9 2020–2024
MarketSoutheast Asia
Power268 hp
Engine3.0 L CA6GV30TD V6 Petrol 3.0 L CA6GV30TD V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/45 ZR1919x8 ET51 5x114.332TiresRims
OE245/40 ZR2020x8 ET51 5x114.335 F / 32 RTiresRims
Alt235/50 R1818x7.5 ET47 5x114.332TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.