Skip to content

2019 Huanghai N1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Huanghai N1.

2019 Huanghai N1 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Huanghai N1 N1

2016 – 2023 3 trims

N1 2.2i

102 hp · I4 215/75 R15 1 fitment
GenerationN1 2016–2023
Power102 hp
EngineI4, Petrol
Center boreN/A
PCDN/A
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 R15 unknown–Tires

N1 2.4i

141 hp · 4G69S4N I4 225/75 R15 4 fitments
GenerationN1 2016–2023
Power141 hp
Engine4G69S4N I4, Petrol
Center boreN/A
PCDN/A
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R15 unknown–Tires
235/70 R1616x6.5 ET45 unknown–TiresRims
245/65 R1716x6.5 ET45 unknown–TiresRims
235/65 R1716x6.5 ET45 unknown–TiresRims

N1 2.8TD

101 hp · JE493ZLQ4CB I4 225/75 R15 4 fitments
GenerationN1 2016–2023
Power101 hp
EngineJE493ZLQ4CB I4, Diesel
Center boreN/A
PCDN/A
ThreadN/A
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R15 unknown–Tires
235/70 R1616x6.5 ET45 unknown–TiresRims
235/65 R17 unknown–Tires
245/65 R17 unknown–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.